extras
We recommend Graupner K series Props for a host of reasons ( Prices include P&P )
Low Cost
Don't need Balancing
Good Availability World Wide
Full range of sizes in both left and right
Light weight reduces vibration and increases rpm
1.4 Pitch gives good speed with out excessive lift or propwalk
We Try and carry the full range of Graupner props in stock ( if you work for Graupner & are reading this Graupner ein beer bitte :-)
|
PART
FINDER SERVICE
write description of part on the back of the cheque it will stay pinned to our notice board till we find it It could be a Prop or a Hull or anything else |
|
|
IF ITS OUT THERE WE WILL FIND IT OR YOUR MONEY BACK
|
£
10
|
 |
K series 4mm thread |
29 31R 33R 36R 37.5 39R 40R 40.5 42R 43.5 45R
|
GK4M - 29 to 45 add R for counter rotation |
£
3.00
|
|
3 Blade |
K
series 4mm thread
|
36 42 |
GTRIP 36 GTRIP 42 |
£
3.00
|
 |
K series dog drive 3/16 inch |
29 31R 33R 36R 37.5 39R 40R 40.5 42R 43.5 45R 48 51R 54 57R 60 63R
|
GKDOG - 29 to 63 add R for counter rotation |
£
3.00
|
|
|
K series dog drive 1/4 inch |
70R |
GKDOG 70 add R for counter rotation |
£
8.00
|
SILICONE WIRE
pure copper, low resistance, high temperature and very flexible
 |
2mm
silicone wire
|
1 meter red & 1 meter black for use with 2mm bannana |
SW
2
|
£
0.00
|
 |
4mm silicone wire |
1 meter red & 1 meter black for use with 4mm Bannana,Deans & LMT |
SW
4
|
£
0.00
|
HEATSHRINK & INSULATION
Waterproofing and Insulation for total peace of mind at the lakeside & safe storage
 |
heat shrink for 2mm silicone wire |
10 x red 10 x black for use with 2mm bannana |
HS
2
|
£
0.00
|
 |
heat shrink for 4mm silicone wire |
10 x red 10 x black for use with 4mm bannana we
strongly recommend using 2 layers of heatshrink
|
HS
4
|
£
0.00
|
 |
Silicone
Tubing
|
for use with 4mm bannana & LMT ULTRA ideal to keep out the water and prevent shortcircuits |
ST
|
£
0.00
|